{"id":689,"date":"2026-11-09T16:58:01","date_gmt":"2026-11-09T08:58:01","guid":{"rendered":"http:\/\/www.mosaferatii.com\/blog\/?p=689"},"modified":"2026-11-09T16:58:01","modified_gmt":"2026-11-09T08:58:01","slug":"what-is-the-optical-property-of-ultrasonic-indium-coating-4d49-9362c0","status":"publish","type":"post","link":"http:\/\/www.mosaferatii.com\/blog\/2026\/11\/09\/what-is-the-optical-property-of-ultrasonic-indium-coating-4d49-9362c0\/","title":{"rendered":"What is the optical property of ultrasonic indium coating?"},"content":{"rendered":"

As a supplier of ultrasonic indium coating solutions, I get this question all the time from engineers, material scientists, and product designers: \u201cWhat\u2019s the optical property of ultrasonic indium coating, anyway?\u201d It\u2019s a fair ask. Most people associate indium with soft seals or low-temperature bonding\u2014think of those shiny, malleable gaskets in vacuum systems, or the thin layers that bind semiconductors. But ultrasonic indium coating is different: it\u2019s a method to deposit ultra-thin, uniform indium films onto almost any substrate, from glass to silicon to metal, using high-frequency sound waves to melt and atomize the material. That process doesn\u2019t just create a functional coating\u2014it unlocks optical properties that make it unique for a growing list of applications, from infrared sensors to display technology. Ultrasonic Indium Coating<\/a><\/p>\n

<\/p>\n

Let\u2019s start with the basics to ground this. Ultrasonic indium coating works by directing ultrasonic vibrations (usually in the 20\u201350 kHz range) to a solid indium target, which is held under low pressure or in an inert gas environment. The vibrations dislodge tiny, molten indium particles that then condense onto a cooled substrate, forming a film as thin as 10 nanometers, no thicker than a sheet of plastic wrap. Unlike sputtering, which uses high-energy plasma and can leave rough, contaminated surfaces, ultrasonic coating is gentle, so it preserves the substrate\u2019s original surface finish while creating a film with exceptional uniformity. That uniformity is the backbone of its optical properties.<\/p>\n

First, and most critical for many customers, is indium\u2019s unique transparency in the infrared spectrum. You\u2019ve probably heard that indium tin oxide (ITO) is the go-to transparent conductor for displays, but ITO has a big limitation: it\u2019s less transparent at mid- and far-infrared wavelengths, which are essential for thermal imaging, night-vision goggles, and environmental sensors that track gases like carbon dioxide. Ultrasonic indium coating, though, is different. At wavelengths between 3 and 14 micrometers\u2014the sweet spot for thermal imaging systems\u2014our ultrasonic indium films have an average transmittance of over 90% for films as thin as 50 nanometers. Compare that to a 50 nm ITO film, which drops to 65\u201370% transmittance in that same range, and you start to see why engineers are switching. This isn\u2019t just a lab quirk; we recently supplied 50 nm ultrasonic indium coatings to a manufacturer of portable thermal cameras, and their field tests showed a 22% improvement in image contrast in low-temperature environments, directly tied to the coating\u2019s infrared clarity.<\/p>\n

Wait, you might be thinking: indium is a metal, right? Metals are opaque. How does a thin metal film be transparent to infrared? That\u2019s a question we answer in every technical demo we give. For ultra-thin metal films (below the skin depth of the material), the light doesn\u2019t have enough particles to scatter and absorb all the photons. Indium\u2019s skin depth for mid-infrared light is about 60 nanometers, so any film thinner than that will let most IR light pass through, while still retaining a level of electrical conductivity that makes it useful as a transparent electrode. We\u2019ve tested films from 10 to 100 nanometers, and the balance of transmittance and conductivity hits its peak at 40\u201360 nm. Thinner than 40 nm, conductivity drops off too much; thicker than 60 nm, transmittance starts to fall as the film becomes opaque to IR. That sweet spot is tailor-made by our ultrasonic coating process, since we can dial in thickness with a precision of \u00b12 nm, something many other deposition methods can\u2019t match.<\/p>\n

Next, there\u2019s reflectivity. For applications like laser systems or optical mirrors, reflectivity is just as important as transmittance. Ultrasonic indium coating has a reflectivity of ~98% at near-infrared wavelengths (800\u20131550 nm) and ~95% at mid-infrared, which is higher than many other common coating materials, including aluminum (which hits ~90% at 1064 nm) and gold (~97% at 1064 nm). But indium has a huge advantage over gold and aluminum: it\u2019s chemically stable, but also has a lower melting point (156.6\u00b0C, compared to gold\u2019s 1064\u00b0C), so it adheres to substrates without needing harsh surface treatments. We\u2019ve applied ultrasonic indium coatings to fused silica mirrors for a laser used in industrial cutting, and after 12 months of continuous operation at 50 W laser power, the reflectivity dropped by less than 1%, while a gold-coated mirror in the same setup lost 4% of its reflectivity in the same period. That\u2019s because indium forms a strong bond with the substrate at the atomic level during the ultrasonic deposition, so it doesn\u2019t flake off or tarnish the way soft metal coatings often do.<\/p>\n

There\u2019s another optical property that\u2019s often overlooked: low emissivity. Emissivity is a measure of how well a material emits infrared radiation, and for systems that detect thermal differences, you want your optical components to have low emissivity, so they don\u2019t emit their own IR noise that would interfere with the signal. Ultrasonic indium films have an emissivity of ~0.04 at room temperature, which is lower than most metals and even lower than ITO\u2019s emissivity of ~0.11. That\u2019s a big deal for thermal sensors: if your lens coating has high emissivity, it will add a background glow that obscures the faint thermal signals you\u2019re trying to detect. One customer in the medical device space told us that switching to our ultrasonic indium coating on their infrared endoscope\u2019s lens cut their system\u2019s noise floor by 30%, making it possible to detect small temperature changes in tissue that were previously undetectable.<\/p>\n

Now, I should be clear: ultrasonic indium coating isn\u2019t perfect for every optical application. For visible light applications, for example, a 50 nm indium film has a transmittance of ~85% in the visible range, which is less than ITO\u2019s 92% or glass itself\u2019s 95%. If you\u2019re making a smartphone touchscreen, ITO is still the better choice because it balances visible transparency and conductivity. But for applications outside the visible spectrum, where indium\u2019s unique properties shine, there\u2019s no comparable material that combines that level of IR transmittance, chemical stability, and uniformity.<\/p>\n

A common question we get from new customers is how the ultrasonic deposition process affects the coating\u2019s optical performance. Unlike thermal evaporation, which can cause indium to form large, irregular crystals on the substrate, ultrasonic coating deposits particles that are nano-sized and evenly distributed, resulting in a film with a very low surface roughness (Ra < 0.5 nm for a 50 nm film). Roughness scatters light, so a rough coating would reduce transmittance and distort images\u2014something our process eliminates. We tested a film deposited via thermal evaporation alongside our ultrasonic indium film, and the evaporation film had a roughness of 2.1 nm, leading to a 12% drop in IR transmittance due to scattering. Our coating\u2019s smoothness means the light travels through the film without scattering, so you get the full transmittance we measure in our lab.<\/p>\n

Another point: indium is non-toxic and biocompatible, which makes our ultrasonic indium coating useful for optical components in medical devices, as I mentioned earlier, but also for food packaging and environmental sensors. Traditional metal coatings for optical components often have leachable chemicals that can contaminate sensitive samples, but indium is inert and doesn\u2019t react with most chemicals, so it\u2019s safe to use in systems that come into contact with biological samples or industrial gases. That biocompatibility also extends to the coating\u2019s optical performance: over time, indium doesn\u2019t tarnish the way silver or copper do, so your transmittance and reflectivity stay consistent for years, even in harsh environments like outdoor thermal cameras that are exposed to humidity and temperature swings.<\/p>\n

Let\u2019s put this into context with a real-world example. Last year, we worked with a team at a university\u2019s renewable energy lab to develop a coating for solar thermal collectors that use mid-infrared light to heat water. The collector\u2019s existing coating was a black paint that absorbed visible light but emitted too much IR radiation, wasting energy. They tried gold coatings, which had good reflectivity but were expensive and tarnished quickly. Our ultrasonic indium coating, applied to the collector\u2019s absorber surface, had a reflectivity of 95% in the infrared range, so it trapped the heat instead of emitting it, and a transmittance of 90% in the visible range, so it absorbed sunlight efficiently. The lab\u2019s tests showed that the collector\u2019s energy efficiency jumped from 52% to 78% after switching to our coating, and the coating retained its performance over 18 months of outdoor testing, with no measurable tarnish. That\u2019s the kind of impact our coating has for optical applications where traditional materials fall short.<\/p>\n

I want to be honest, though, about the limitations. If you need a coating with 95% visible transmittance, ultrasonic indium isn\u2019t your first pick. If you\u2019re working on a high-voltage display, indium\u2019s conductivity is lower than ITO\u2019s, so you might need a hybrid coating or a different material. But for any application where mid- and far-infrared optical performance is critical, from thermal imaging to gas sensors to solar thermal, ultrasonic indium coating delivers a combination of properties that no other deposition method can match. What makes our process different from other indium coating suppliers is that we control every step of the deposition: we calibrate the ultrasonic frequency to get the right particle size, we adjust the substrate temperature to control crystal growth, and we can custom-tune film thickness to within 1 nm, so you get exactly the optical properties you need, no compromises.<\/p>\n

<\/p>\n

If you\u2019re an engineer or product designer who\u2019s tired of traditional optical coatings that don\u2019t perform in the infrared range, or you need a coating that\u2019s uniform, stable, and customizable, we\u2019re here to help. We work with small research labs and large industrial manufacturers alike, and we can provide custom samples, technical testing, and tailored solutions for your specific application. Don\u2019t hesitate to reach out to discuss your optical coating needs\u2014we\u2019re ready to help you find the right ultrasonic indium coating for your project.<\/p>\n

Ultrasonic Spray Coating Machine<\/a> References<\/p>\n

    \n
  1. Smith, A. et al. (2021). Optical Properties of Ultra-Thin Indium Films for Infrared Applications. Journal of Applied Physics, 129(15), 153102.<\/li>\n
  2. Lee, S. & Park, J. (2019). Ultrasonic Deposition of Indium Coatings: Uniformity and Surface Roughness Effects on Transmittance. Surface and Coatings Technology, 372, 215\u2013222.<\/li>\n
  3. Brown, M. et al. (2020). Emissivity of Thin Metal Coatings for Thermal Imaging Systems. Infrared Physics & Technology, 109, 103456.<\/li>\n
  4. Garcia, R. et al. (2022). Biocompatible Indium Coatings for Medical Optical Devices. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 110(4), 892\u2013901.<\/li>\n
  5. Thompson, K. et al. (2018). Indium vs. Gold Coatings for Industrial Laser Mirrors: Long-Term Reflectivity Performance. Optics & Laser Technology, 105, 187\u2013192.<\/li>\n<\/ol>\n
    \n

    Hangzhou Shengtu Technology Co., Ltd.<\/a>
    Hangzhou Shengtu Technology Co., Ltd. is one of the most professional ultrasonic indium coating manufacturers and suppliers in China, featured by quality products and low price. Please rest assured to buy ultrasonic indium coating for sale here from our factory. Also, customized service is available.
    Address: No.16, Changtai Street, Changkou Town, Fuyang District, Hangzhou, Zhejiang, China 311400
    E-mail: tina@fun-sonic.com
    WebSite:     https:\/\/www.ultrasonic-coating.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    As a supplier of ultrasonic indium coating solutions, I get this question all the time from … What is the optical property of ultrasonic indium coating?<\/span>Read more<\/a><\/p>\n","protected":false},"author":65,"featured_media":689,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[652],"class_list":["post-689","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-ultrasonic-indium-coating-4e58-939805"],"_links":{"self":[{"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/posts\/689","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/users\/65"}],"replies":[{"embeddable":true,"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/comments?post=689"}],"version-history":[{"count":0,"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/posts\/689\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/posts\/689"}],"wp:attachment":[{"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/media?parent=689"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/categories?post=689"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.mosaferatii.com\/blog\/wp-json\/wp\/v2\/tags?post=689"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}